Cancelling A Preset Recording; Playing Back; Playing A Cassette; Adjusting Picture Alignment Manually - Samsung DVD-V6800 User Manual

3
To change any values, select the required
programme by pressing the œ or ƒ button,
then change any values as required. For
more details refer to page 24. (Step 2 to 9).
• Press the MENU button to exit the menu.

Cancelling a Preset Recording

You can cancel any programmes that are:
• Incorrect
• No longer required
1
Press the MENU button, then press the œ or
ƒ button to select PROG . The Timer
Method menu is displayed.
SETUP
If you want to set the
DVD
timer program, press
VCR
the OK key.
PROG
FUNC
OK
2
Press the OK or ‹¤button. The list of preset
recodings is displayed with the corresponding
information.
• It can be displayed simply by pressing the
TIMER button on the remote control.
3
Press the œ or ƒ button to select the
programme to be cancelled,then press the
CLEAR button .
PR Day
-- -- --
OK
• All the recording information is deleted and
broadcast will not be recorded.
• Press the MENU button to exit the menu.
26 - English
Downloaded From Disc-Player.com Samsung Manuals
Return
Menu
Start Stop Speed
-- :-- -- :-- --
: :
: :
: :
: :
: :
: :
Return Menu
P laying Back
P laying Back

Playing a Cassette

This function allows you to play any pre-
recorded cassette.
1
Switch on both the television and your
DVD-VCR.
2
If the safety tab on the cassette is removed,
the cassette is played automatically.
• When a cassette is loaded, the tape position
is optimized automatically to reduce
disturbance (Digital Auto Tracking).
• When playing a cassette, if the end of the
tape is reached, the cassette is rewound
automatically. NTSC tapes can be played
back but cannot be recorded with this DVD-
VCR.
3
Press the ■ (stop) button to stop the
playback.
Press the (eject) button to eject the
playback.
Adjusting Picture Alignment
Manually
This feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during play-
back, adjust alignment manually by pressing the
(œ œ ƒ ƒ
TRK or ) button until the picture is clear
and stable.
• The tracking bar appears.
• The image is adjusted.