Advertisement
Available languages
Available languages
The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert
the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure,
that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle, is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions.
IMPORTANT ! SAFETY INSTRUCTIONS
In order to protect your own and others' safety and to avoid
invalidation of the warranty of this product, please read this section
carefully before operating this product.
- This product has been designed and manufactured for being operated as
active speaker system in the applications tipical of a sound reinforcement
system or of a sound recording system. Operation for purposes and in
applications other than these has not been covered by the manufacturer in the
design of the product, and is therefore to be undertaken at end user's and/or
installer's sole risk and responsability.
- This unit conforms to Class 1 insulation, and for safe use it is required that the
protective earth contact is connected to a grounded (earthed) outlet.
TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK:
• Never expose this product to rain or moisture, never use it in proximity of water
or on a wet surface. Never let any liquid, as well as any object, enter the product.
In case, immediately disconnect it from the mains supply and refer to servicing
before operating it again. Never place burning candles or other sources of open
flame on top of the device.
• Before connecting this product to the mains supply, always make sure that
the voltage on the mains outlet corresponds to that stated on the product.
• This product must be connected only to a grounded mains outlet complying
to the safety regulations in force via the supplied power cable.
In case the power cable needs to be substituted, use exclusively a cable of the
same type and characteristics.
• This device is connected to the power line even when the mains switch is in the
'0' (off) position and the power indicator is off. As long as it is plugged in there
are dangerous electrical potentials inside the device, so, before undertaking any
sort of maintenance work etc., always make sure it has been unplugged from the
mains socket.
• Never place any object on the power cable. Never lay the power cable on a
walkway where one could trip over it. Never press or pinch it.
• Never install the product without providing adequate airflow to cool it.
Never obstruct the air intake openings on it. Leave enough room to get to the
mains power socket and the mains connector on the back panel.
• In case the external fuse needs replacement, substitute it only with one of the
same type and rating, as stated on the product.
• Always make sure the Power switch is in its '0' (off) position before doing any
operation on the connections of the product.
• Before attempting to move the product after it has been installed, remove all
the connections.
• To disconnect the power cable of this product from the mains supply never
pull the cable directly. Hold the body of the plug firmly and pull it gently from
the mains supply outlet.
This product does not contain user serviceable parts.
To prevent fire and/or electrical shock, never disassemble it or
remove the rear panel. For maintenance and servicing always
refer to the official Montarbo Distributor in your Country or
to qualified personnel specifically authorised by the Distributor.
- Before placing the product on a surface of any kind, make sure that its shape
and load rating safely match the product size and weight. When installing the
speaker system on a stand, use a stable stand that will fit in the adapter and may
carry the loudspeaker weight. When two loudspeakers are laid one upon the
other, make sure that stability is guaranteed by matching the upper loudspeaker
feet to the lower loudspeaker cavities.If you wish to suspend the system,
follow the directions at page 14.
- To avoid shocks, kicks, or whatever action, always reserve a protected area with
no access to unqualified personnel as installation site of the product. In case the
product is used near children and animals closest supervision is necessary.
- This product can generate very high acoustic pressures which are dangerous for
the hearing system. Always avoid operation at loud levels if anyone is excessively
near to the product (at least 1 m of distance).
☛ Never expose children to high sound sources.
WARNING
CAUTION!
active, processor controlled, bi-amped speaker system
ENGLISH
INDEX
__________________________________________
__________________________________________
__________________________________________
Important !!!
__________________________________________
__________________________________________
Technical Specifications
◗
__________________________________________
Response curve
◗
__________________________________________
Block diagram
◗
__________________________________________
Connectors
◗
__________________________________________
Connections
◗
__________________________________________
Applications
◗
__________________________________________
Installation examples
◗
__________________________________________
Spare parts
◗
__________________________________________
PACKAGE CONTENTS
Bi-amp active system W440A
◗
Power supply cable
◗
XLR to XLR cable (for connection to the mixer)
◗
Owner's manual
◗
Warranty certificate
◗
CE declaration of conformity
◗
W440A
10
10
11 - 13
13 - 14
33 - 42
34
35
35
36
37
38 - 40
41
42
9
ENGLISH
Advertisement
Chapters
