Montarbo W440A Instruction Manual page 11

W440A
active, processor controlled, bi-amped speaker system
Rear panel: equalizer controls
The system's frequency response may be tailored to the user's
requirements by means of the BASS, MID and HIGH equalizer
controls. The following examples represent only a limited sample
of the various possible settings.
Starting from one of these, the user may change the settings to
obtain a customized one that will be the optimal one for the
desired results.
Example 1 :
This results in the flattest frequency
response. It is the suggested setting
for high level P.A. applications.
It is the setting of choice when the
W440A are used with a subwoofer.
Example 2 :
This is the suggested setting when
used for low volume music, because
the limits of the audible range are
boosted (low and high frequencies).
Do not use this setting at high
volumes, because it will result in a decrease of the available
dynamic range.
Example 3 :
This is the suggested setting for high
level stage monitoring applications.
By reducing the audible range limits
boosting the available dynamic range
is increased.
12
ENGLISH