Westinghouse WBR 055 Manual page 54

54
0-10 V 0.0V
BOILER
Press v once.
BUS COMM NO CONN
Press v once.
POWER ON 0H
CH ON 0H
Press v once.
DHW ON 0H
GOOD IGNIT 1X
Press v once.
SYS CH ON 0H
SYS DHW ON 0H
Table 21 - Boiler Control Status Menu Screens
The next ten screens display the last ten boiler lockout faults.
Press v to scroll through the faults from most recent to oldest.
Screen
FAULT HISTORY 1
07/27/2009 Mo 5:19A
Press v once.
FAULT HISTORY 2
08/28/2009 Fr 5:19A
Press v once.
FAULT HISTORY 3
08/28/2009 Fr 5:19A
Press v once.
WHL-016 Rev. 4.14.16
The top line displays the voltage on
the optional input. This voltage is only
relevant if an external 0-10 volt signal is
being used to control the boiler.
This display shows the status of the
communication bus between multiple
boilers. If in a single boiler configuration,
the display will show 'NO CONN'. In a
multiple boiler configuration, if this is
the Master Boiler and other boilers are
connected to the communication bus
and powered, this screen will show the
address of each boiler connected to
the bus.
The top line indicates the amount of
hours the boiler has been powered
over its life. The second line indicates
how many hours the burner has been
on for central heat demand over its life.
The top line indicates the hours the
burner has been on for hot water
demand over the boiler's life. The
second line indicates how many times
the burner has successfully ignited
over the boiler's life.
This screen displays how many hours
the boiler has run to meet central heat
and DHW demand.
Description
This screen displays the most recent
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the fault code
encountered. The bottom line displays
the date and time the fault occurred.
This screen displays the second oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the third oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
FAULT HISTORY 4
08/28/2009 Fr 5:19A
Press v once.
FAULT HISTORY 5
08/28/2009 Fr 5:19A
Press v once.
FAULT HISTORY 6
08/28/2009 Fr 5:19A
Press v once.
FAULT HISTORY 7
08/28/2009 Fr 5:19A
Press v once.
FAULT HISTORY 8
08/28/2009 Fr 5:19A
Press v once.
FAULT HISTORY 9
08/28/2009 Fr 5:19A
FAULT HISTORY 10
08/28/2009 Fr 5:19A
Table 22 - Boiler Fault Screens
This screen displays the fourth oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the fifth oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the sixth oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the seventh oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the eighth oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the ninth oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.
This screen displays the tenth oldest
boiler control lockout fault. The top
line will alternate between the words
'FAULT HISTORY' and the actual fault
encountered. The bottom line will
display the date and time that the fault
occurred.