Table of Contents
Advertisement
The following defined terms are used throughout this manual
to bring attention to the presence of hazards of various risk
levels or to important product information.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in serious personal injury or
death.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in personal injury or death.
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in moderate or minor personal
injury.
CAUTION used without the safety alert symbol indicates
a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTICE is used to address practices not related to personal
injury.
Foreword
This manual is intended to be used in conjunction with other
literature provided with the boiler. This includes all related
control information. It is important that this manual, all other
documents included in this system, and additional publications
including the Code for the Installation of Heat Producing
Appliances and National Fuel Gas Code - ANSI Z223.1 (latest
versions), be reviewed
in their entirety before
beginning any work.
Installation should be
made
in
accordance
with
the
regulations
of
the
Authority
Having
Jurisdiction,
local code authorities,
and utility companies
which pertain to this
type of water heating
equipment.
Authority
Having
Jurisdiction (AHJ) – The
AHJ may be a federal,
state, local government,
or individual such as a
fire chief, fire marshal,
chief of a fire prevention
bureau,
labor
department or health
department,
building
official
or
electrical
inspector,
or
others
having statutory authority. In some circumstances, the property
owner or his/her agent assumes the role, and at government
installations, the commanding officer or departmental official
may be the AHJ.
NOTE: Westinghouse reserves the right to modify product
technical specifications and components without prior notice.
For the Installer
This boiler must be installed by qualified and licensed personnel.
The installer should be guided by the instructions furnished with
the boiler, and by local codes and utility company requirements.
In the absence of local codes, preference should be given to the
National Fuel Gas Code - ANSI Z223.1, latest version.
Installations Must Comply With:
Local, state, provincial, and national codes, laws, regulations,
and ordinances.
The latest version of the National Fuel Gas Code, ANSI Z223.1,
from American Gas Association Laboratories, 8501 East Pleasant
Valley Road, Cleveland, OH 44131.
In Canada - CGA No. B149 (latest version), from Canadian Gas
Association Laboratories, 55 Scarsdale Road, Don Mills, Ontario,
Canada M3B 2R3. Also, Canadian Electrical Code, C 22.1, from
Canadian Standards Association, 5060 Spectrum Way, Suite
100, Mississauga, Ontario, Canada L4W 5N6.
Code for the Installation of Heat Producing Appliances (latest
version) from American Insurance Association, 85 John Street,
New York, NY 11038.
The latest version of the National Electrical Code, NFPA No. 70.
NOTE: The gas manifold and controls met safe lighting and
other performance criteria when undergoing tests specified in
ANSI Z21.13 - latest edition.
3
WHL-016 Rev. 4.14.16
Advertisement
Table of Contents
