Start Up - Scansonic D100 User Manual

start up

1. Connect the radio to mains power using an adaptor, and switch on the
main switch on the back cabinet, it will show
2. then enter into standby mode with original clock "00:00"
When the radio is powered on for the first time by RC, it will start as
below:
for available Digital radio stations.
When the scan is completed, the first station (alphabetically) will begin to
play.
3. Press the "PoWer" button once, the radio will change from operation
mode to standby mode and the backlight will turn off.
tips: 1. the backlight will automatic turn off after 20s without any
operation also. User needs to active the radio device by press any
button before operating.
2. If you have used the DaB radio before, and do the factory
reset, the first state will be stayed at the last mode what you used.
6