Language - Scansonic D100 User Manual

sec/60 sec/90 sec/120 sec/180 sec. selecting "on" will force your radio's
backlight to remain on constantly. If you select a specific time delay, after
the selected time period has lapsed the display will dim down under the
following two situations:
− When the radio is turned on and no operation under selected time out
period.
− When the radio turns off into standby mode, the backlight will dim
down after the time out period has lapsed.
2. on level: this option will determine how bright the display's backlight is lit
while the radio is on on mode. there are 3 options for this setting: high,
Medium& Low.
3. Dim level: there are 3 brightness levels of the Dimmed backlight
available – low/medium/high.

Language

this setting will change the language in which the menu system is displayed
on your radio. there are four languages: english, french, German, Italian.
factory reset
the DaB radio can be reset to the factory defaults at any time, once a reset
has been performed, the DaB radio will automatically begin full scan.
1. select "factory reset", the display will shows:
2. Press "◄" or "►" key to choose <Yes>, then press "Select" to perform
the rest.
noted: once you do this operation, some of store information will be
missed like as preset station, alarm will be emptied.
10