Citizen CMP-10 User Manual page 9

Precautions on Using Thermal Paper (Print Paper)
G Print density may change with the kind of print paper. Print
density is adjusted by the Print Density Set command in
Command Reference. For details, refer to Command Reference
(Separate sheets).
G Observe the following when using thermal paper. Thermal paper
is not resistant to discoloration, deterioration in quality, and thin
printing.
• Do not let printed thermal paper exposed to light for a long
• Avoid exposure to high temperature, humidity, liquid, or
• When keeping the printer thermal paper on a board, do not
• For long-time storage, use thermal paper of high storage type
• Avoid contact with a film of vinyl chloride for a long time.
• Avoid using ammonia. Do not put thermal paper near the paper
• Avoid putting sweat or grease from your hands on the surface
• Store thermal paper in a dark place with average temperature
G Using print paper with a thickness outside the recommended
range may cause improper print quality.
CAUTION
time.
sunlight.
use paste, adhesive, or adhesive tape containing volatile
organic solvent.
or copy it with plain paper copier.
copied by use of ammonia.
(printed or to be printed) of thermal paper.
below 25°C and relative humidity below 65% .
— 7 —