DCS DD124P5 Installation Manual page 6

3/811
mm)
Moisture
protection
// ............... \
....i_ 90 ° .ces can be located ote: SerVl _ _n wer ®.
.... _ /, N _ uisu_,ra
max. o 11/2"(38 nm)
_mpor_nt_ max. 15 A
Be sure the edges of the services hole are smooth or covered. If the service hole is through a metal partition
the hole must be protected with the Edge Protector supplied to prevent damage to the power cord or hoses.
<_> These marks indicate mounting tab screw locations
* Preferred position. If adequate clearance, services hole can be higher to clear toe kick space.
If hole is higher, ensure drain hose(s) are routed straight into the waste connection.