÷
min. 7Ys"
t
I
(200 mm)
110-120 VAC
Adjacent cabinetry m ustnot
max. 15 A
extend above cavity base
lmportand
Besurethe edgesof the serviceshole aresmoothor covered, i f the servicehole isthrough a metalpartition
the hole must beprotectedwith the EdgeProtectorsuppliedto preventdamage to thepower cord or hoses.
These marks indicate mounting tab screw locations
Note: To align drawer front to adjacent cabinetry, the product to counter top clearance can be
increased to 1/s"(3 ram).
Preferred position. If adequate clearance, services hole can be higher.
If hole is higher, ensure drain hose(s) are routed straight into the waste connection.