Fault Description Table - Hisense W10630786B User's Operation Manual

Do not allow children to operate, crawl on, be near or inside your washer.
Note that during the wash cycles, the surface temperature of the porthole
d o o r m a y increase.
Close supervision of children is necessary when the appliance is used near
children.
Hot fill
Red inlet valve
Blue inlet valve
Fig.1

Fault description table

Digital display
(if fitted on your machine)
"F01" "F02"
"F03"
"F04" "F05" "F06" "F07"
"F13"
"UNB"
Error code
The appliance stops during the programme.
For models with a remaining time display, a failure code between "F01" to "F07" and
"F13"or "UNB"appears on the display.
If a failure code "F01" appears on the display:
15
Cold fill
Y-piece
Red inlet valve
Blue inlet valve
Fig.2
Fault description
"Water supply fault"
"Draining fault"
"Electrical module"
"Door lock fault"
"Unblance"
Cold fill
After-Sales Service(see After-Sales Service ).
.
If a failure code "F02" appears on the display:
press the "start/pause button to cancel the failure code and start
the programme;if the fault persists,unplug the appliance and contact
After-Sales Service(see After-Sales Service ).
If a failure code "F03" appears on the display:
contact After-Sales Service(see "After-Sales Service ). "
.
If a failure code between"F04"to "F07"appears on the display:
Switch the appliance off by pressing the " Power
desired programme; if the fault persists,unplug the appliance and contact
After-Sales Service(see "After-Sales Service ). "
.
If a failure code "F13" appears on the display:
Check whether the door is closed or not and press the "start/pause"button;
if the fault persists, unplug the appliance and contact After-Sales Service
(see "After-Sales Service").
.
If a failure code "UNB"appears on the display:
Switch the appliance off by pressing the " Power
the clothes, then select the spin programme and start; if the fault persists,
unplug the appliance and contact After-Sales Service(see "After-Sales Service ). "
; if the fault persists,unplug the appliance and contact
" "
"
"
being
Ensure that
if the fault persists, unplug the appliance and
"
" button 2s and select the
" button 2s and rearrange
16