Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hisense WT5J1013DT
Summary of Contents for Hisense WT5J1013DT
- Page 1 2309707 5 1013D 英文 2 12.12 侯昌漾 2 12.12 2 12.12 X08061752 匡永坤 程木聪2022.12.12 崔维明2022.12.12...
- Page 2 USER’S OPERATION MANUAL Before operating this unit, please read this manual thoroughly, and retain for future reference English WT5J1013DT （2309707）X08061752A...
- Page 4 0.03 10.5kg. WT J101 10.5 0.03 550X604X969...
- Page 7 water pressure from 0.03 MPa to 0.8 MPa. Appropriate tap Outlet end face Length of front end must be greater than 10mm. 1.Push slider down to remove hose joint from water inlet assembly, as shown in Fig. 2.Loosen 4 screws on hose joint properly and then connect hose joint to tap, as hose unavailable, loosen 4 screws and remove bush, as shown in Fig.
- Page 8 2.Do not remove absorbing pad. Check if it falls off or has been damaged every time 10cm washing machine is going to be used. If yes, contact Hisense service department immediately. 3.Cut one part of the drain hose when it hose at proper is too long.
- Page 9 10.5 88.4 g 10.5 1.5-2.0 80.6g 74.1 g 67.6g 61.1 g 54.6g 48.1 g 1.5 3.0 41.6g 36.4 g 28.6g...
- Page 10 Delay time is changed, Normal the new Delay time is displayed; when the “Start/Pause” button is WT5J1013DT pressed, the program controller will automatically adjust the Delay Rinse+Spin time according to the currently required total time.
- Page 11 Use for normally fabric, suitable Normal for washing dirty cotton fabric. Rinse+Spin Rinse and Spin of clothes only. Baby Care Tub Clean...
-
Page 12: Troubleshooting
Trouble shooting Issue to continue the process. been closed properly. cannot manually, then close the lid and press be handled automatically. process. minutes. minutes. off the department. abnormal. department. the third time, it is necessary to eliminate the main control board and department.
Need help?
Do you have a question about the WT5J1013DT and is the answer not in the manual?
Questions and answers