Maintenance - Valor PORTRAIT 575LFK Installation Instructions Manual

c. Place the rear
brick wall. It
should support
the grille. If not,
keep holding it
while you place
the side brick
walls. Refer to
the fi replace
installation
manual for more
information on installing the brick walls.
19. Finish the installation of the heater including all
the checks necessary for function. Reinstall the
window.
20. Hook the window trim cover provided with the 578
kit on the top edge of the window frame.
Top
Window frame
cover—rear view
21. If the 576 optional panel will be used, install it now.
a. Fix its support bracket to the bottom front
bracket of the casing using two screws.
b. Slide in the cover panel at a angle to insert it
between the casing's legs. Center it and lean it
against its support.
22. Hook the 578 front trim to the casing top front
bracket as shown.

Maintenance

WARNING
!
DO NOT TOUCH THE BARRIER SCREEN OR DO NOT TOUCH THE BARRIER SCREEN OR
STOVE WHILE THEY ARE HOT! Let the stove STOVE WHILE THEY ARE HOT!
cool first before cleaning it. cool first before cleaning it.
FOR SA FETY P U R P OS E, e ns ur e t he FO R SAF ETY P URPO SE , en sur e t he
ba r r ie r s c r e e n is r e - ins ta lle d on the ba rr ie r sc re en is r e-in stal le d on t he
s tov e f r ont a ft e r m a inte na nc e . sto ve fro nt a fter m ai nten an ce .
Dust down the surface regularly with a soft brush and
occasionally follow up with a wipe over with a wet cloth.
A sealer has been applied to the surface, no cleaning
agents nor polishes should be used. In case of an
accidental spill, soak up the liquid IMMEDIATELY with
a dry cloth and follow up with a wipe down with a wet
cloth.
The front steel trim can be cleaned with Windex. To
clean the barrier screen, use a soft brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer's barrier for this
appliance.
To clean the stove glass window, refer to the owner's
manual supplied with the appliance. DO NOT clean
with ammonia.
Let the stove
7