Windshield Wiper Operation - Chrysler 200 2016 Owner's Manual

Windshield Wiper Operation

Rotate the end of the lever to one of the first four detent
positions for intermittent settings, the fifth detent for low
wiper operation and the sixth detent for high wiper
operation.
Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173
NOTE: If snow packing occurs that obstructs the normal
operation of the windshield wipers the following mes-
sage will appear in the Electronic Vehicle Information
Center (EVIC) or the Driver Information Display (DID):
Front Wipers Blocked Cycle Switch or Clean the Wind-
shield . It is important to remove the snow accumulation
to allow the wipers to function normally and to maintain
good visibility of the road.
Always remove any buildup of snow that prevents
the windshield wiper blades from returning to the
"park" position. If the windshield wiper switch is
turned off, and the blades cannot return to the "park"
position, damage to the wiper motor may occur.
I n f o r ma t i o n P r o v i d e d b y :
CAUTION!
3