Terminology; Display During Microbubble (Mb) No-Stop Phase; Display During Level-Stop Phase - Uwatec Smart PRO Instructions Manual

2 Terminology

This chapter will exclusively deal with terminology and display features used whilst diving with MB-levels.
All other features are described in chapter III (page 11).

2.1 Display during Microbubble (MB) No-Stop Phase

An MB-level
between
L1 and L5
was chosen.
%
C
DEPTH DIVE TIME
CNS O %
2
%
NO STOP
MAX.DEPTH DECO INFO
MB No-Stop time
Remaining time at a
respective depth allowing
ascent without level-stop.
26.2 m/86ft

2.2 Display during Level-stop phase

Total ascent time
including Level-stops
%
C
DEPTH DIVE TIME
CNS O %
2
%
LEVELSTOP
m
MAX.DEPTH DECO INFO
ft
Level-stop depth
The deepest Level-stop
at the time will be
displayed.
35.7m
117ft
Level-stop time
The duration of a level-stop
at a given level-stop depth
will be displayed.
IV Uwatec ® Smart dive computers
MB No-stop phase
Dive phase during which ascent is allowed
without MB level- stop.
time
dive time
current depth
maximum depth
Time
MB No-stop phase
Level-stop phase
12min MB No-Stop time
Total ascent time (14 min)
3m/10ft
6m/20ft
lowest
9m/30ft
level-stop
3 min
level-stop
Level-stop phase
To complete the dive without being
reduced to a lower MB level all
requested level-stops must be
observed.
IV
23