Starter Relay - TGB BR8 Service Manual

5-5 STARTER RELAY

A. Operation of starter relay.
Watch: Please place main stand to park
the motorcycle for inspection.
Inspection: Turn the main switch to
"ON" position and press the starter
button.
Note:
(1) If there is a snap sound, then the
function is normal.
(2) If there is no snap sound, then the
function is abnormal.
Please check:
1. Starter relay ground circuit.
2. Starter relay voltage.
B. Starter relay ground circuit
Disassembly:
Connect the start relay connector and
electric tester by:
A. Megga meter's positive terminal with
the relay yellow/red terminal.
B. Connect the negative terminal with
ground circuit and press the starter
button. Then, check the electricity
continuity.
Note:
(1) There should be continuity when pressing the start button.
(2) If there is no continuity when pressing the starter button, then check the continuity
between starter button and connecting cable.
C. Check starter relay voltage.
Watch: Please place main stand to park
the motorcycle for inspection.
Measure method:
A. Connect megga meter's positive
terminal with the relay green/yellow
terminal.
B. Connect the negative terminal with
ground circuit and push the starter
button. Then, check the electricity
continuity.
Turn the main switch to "ON" position and hold the brake lever.
88