Inspection And Change Of Engine Oil - TGB BR8 Service Manual

2-2 INSPECTION AND
CHANGE OF ENGINE OIL
Watch: Please place main stand to park the
motorcycle for inspection.
Inspection: Stop engine for 2~3 minutes when
it is warmed. Remove the engine oil level and
check if the oil level is bellow the lower limit.
Fill engine oil to the level between upper and
lower limits.
* Change Engine Oil *
Note: Please change engine oil according to
regular maintenance schedule. If ridden
on heavy load or long distance, please
shorten the maintenance schedule for oil
change.
● Please put oil tray under the left crankcase
and remove the oil drain plug. Re-install the
drain plug when the engine oil is drained.
* Clean up the oil filter *
Inspection:
(1) If O-ring is damaged, please replace with
new one.
(2) If there is any deposit, please use clean up
before re-assembly.
Note:
(1) Torque of oil strainer screen:
150 ~ 200 kg-cm.
(2) Lubrication Type: SAE 10W-40
Engine oil capacity
* BH8 / BR8 / BF8 *
125c.c. Engine disassembled : 900c.c.
change oil : 750 c.c.
* BR9 / BF9 *
151c.c. Engine disassembled : 1000c.c.
change oil : 900 c.c.
(3) Check if there is any leakage after oil
change. Warn the engine and check the
engine oil level again.
28