Rear Wheel - TGB BR8 Service Manual

4-4 REAR WHEEL

Watch: Please place main stand to park the
motorcycle for maintenance.
Disassembly:
◎ Exhaust pipe.
◎ Lock screw nut and washer.
◎ Rear wheel.
Note:
(1) Please use vacuum to clean wheel rim
and lining. Try to reduce the contamination
of asbestos fiber, which may affect the
human breath system or lead to cancer.
(2) The transverse eccentricity should be within 3.0mm. If the condition is poor, please
replace with new one.
(3) The lateral eccentricity should be within 3.0 mm. If the condition is poor, please replace
with new one.
Brake lining assembly (brake shoe,
◎
brake shoe spring).
Inspection: Use 3 points of Vernier calipers
(two ends and center) to measure lining
thickness. If lining is badly worn and
thickness less than 2.0 mm. Please replace
with new assembly (brake shoe, brake shoe
spring).
Warning: Please do not apply any grease on
brake lining, which can lead to unsafe drive.
78