Front Wheel - TGB BR8 Service Manual

4-3 FRONT WHEEL

Watch: Please place main stand to park the
motorcycle for maintenance.
Disassembly:
◎ Speed meter cable nut.
◎ 2 tightening bolts on clipper.
◎ Clipper.
Note: Do not apply brake when removing
clipper from brake disk. Otherwise, the lining
can contact.
◎ Front wheel.
Inspection: Check eccentricity and wear
condition.
Note: If eccentricity is higher than 0.2mm,
please replace with new one to ensure driving
safety.
◎ Speed meter gear assembly.
*Inspection of Wheel Rim*
Put wheel rim on rotation stand.
Rotate the wheel slowly and use dial-gauge to
measure eccentricity
Note:
(1) The transverse eccentricity should be
within 3.0 mm. If the condition is poor,
please replace with new one.
76