Changing The Interior Lights; Using Your Refrigerator - Kenmore 65702 Use & Care Manual

CHANGING THE INTERIOR LIGHTS

WARNING
Electric Shock Hazard
Before changing any of the interior lights, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box. Failure to do so could cause electric shock
resulting in death, personal injury, or damage to the
appliance.
Refrigerator Light Replacement
1. Unplug the power cord from the outlet.
2. Open the refrigerator door.
3. Pull the light cover down while pushing it backwards
to remove it.
4. Disconnect the housing connector.
5. Change the LED from the light cover
6. Install the light cover, close the door, and plug in
the power cord.
DA68-01921B.indb 24

USING YOUR REFRIGERATOR

NOTE : Replacement LED is available from your nearest
service center. If you need to change LED, contact our
service center
Freezer Light Replacment
1. Unplug the power cord from the outlet.
2. Open the freezer door.
3. Pull the shield down while pushing it backwards
to remove it.
4. Disconnect the housing connector.
5. Change the LED from the light cover.
6. Install the light cover, close the door, and plug in
the power cord.
Light Cover
Light Cover
24
2010.3.5 9:27:15 AM