Preset Programmes; An Introduction To Your Programmable Room Thermostat; User Instructions - Danfoss TP5001 User Instructions

User Instructions

GB

An introduction to your programmable room thermostat

Your programmable room thermostat allows you to programme
diff erent temperatures at diff erent time periods. You can programme
one set of times and temperatures for week days with a diff erent set of
temperatures for weekend days, this is referred to as 5/2 day operation.
The thermostat can also be set up by your installer to provide one set
of times and temperatures that are repeated each day of the week. This
is referred to as 24 hour operation.
The thermostat can also be set by you to provide two diff erent
programming blocks which can then be assigned to any day of the
week, this is referred to as A/B programme operation.
All thermostats can be set by your installer to provide up 2, 4 or 6 time
and temperature settings each day.
All thermostats feature useful overrides, including a programmable
frost setting.
Your thermostat has some advanced features which the installer will
set-up if they are required. There are also a number of advanced features
which can be set up by you. These advanced settings alter the way that
your thermostat operates, some also aff ect the programming functions
and the user overrides. Please read the User Advanced Programming
instructions before programming the unit (see page 10).

Preset programmes

Your TP5001 comes ready programmed with a set of operating times and
temperatures which suit most people. Please remember that some of the
options available will depend on how the installer has set up the unit.
Weekdays (Mon-Fri)
Event
1
2
3
4
5
6
Note: these are also times for Block
2
Time Temp. °C
06:30 20
08:30 15
11:30 20
13:30 15
16:30 21
22:30 15
"A" programmes
Weekend (Sat-Sun)
Event Time
1 07:30
2 09:30
3 11:30
4 13:30
5 16:30
6 22:30
Note: these are also times for Block "B"
programmes
Temp. °C
20
20
20
20
21
15