Danfoss TP5001 User Manual
Programmable room thermostat
Hide thumbs
Also See for TP5001:
- User instructions (105 pages) ,
- User manual (104 pages) ,
- Installation manual (100 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Danfoss TP5001
Summary of Contents for Danfoss TP5001
- Page 1 User Guide TP5001 Programmable Room Thermostat www.heating.danfoss.com...
- Page 2 User Guide TP5001 Programmable Room Thermostats LCD Overview Symbols Function description Symbols Function description Mon – Sun Current set day Heating active Current on/off period Frost protect active Current set time / parameter Schedule mode number in setup Room temperature...
- Page 3 User Guide TP5001 Programmable Room Thermostats Frost Protection Temperature • You can switch the thermostat OFF (Standby) by alternately pressing . In OFF (Standby) mode, the thermo- stat is set to a Frost Protection temperature setting and will switch On only if the measured temperature falls below this temperature (5 °C by default).
- Page 4 User Guide TP5001 Programmable Room Thermostats Set Control Parameters • Press M button for 6 seconds to enter the parameter setting mode. Press M for parameter selection and set the parameter range via < or >. Complete all adjustments. • To exit press , which is available for this purpose (automatic exit after 20 seconds with no operation).