Your Programmable Room Thermostat; Preset Programmes; User Instructions - Danfoss TP5000 + RF Installation Instructions Manual

User Instructions

GB

Your programmable room thermostat

The TP5000 allows you to programme up to 6 times and
temperatures at which your heating will come on and go off each
day. You can programme one set of times and temperatures for
weekdays and another set for weekends.
It features several user overrides including frost protection,
thermostat mode and time or temperature display.

Preset Programmes

Your TP5000 comes ready programmed with a set of operating
times and temperatures which often suit most people.
Weekdays (Mon-Fri)
Event
1
2
3
4
5
6
If you want to change any of these settings you can do so by
following the instructions on pages 10-11.
First, follow the steps on page 9 to set the correct time and date.
8
Time Temp °C
06:30 20
08:30 15
11:30 20
13:30 15
16:30 21
22:30 15
Weekend (Sat-Sun)
Event Time
1 07:00
2 16:00
3 23:00
4 00:00
5 01:00
6 01:59
Temp °C
20
21
15
15
15
15