DAELIM S4 50cc Service Manual page 50

LUBRICATION SYSTEM
FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS
FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS
FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS
FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS FAN SCREWS
ASSEMBLY
● Clean all parts with fresh cleaning oil.
● Install the inner and outer rotors into the oil pump
body.
● Install the oil pump plate into the pump body.
● Tighten the fan screw.
NOTE
•Check the oil pump to operate smoothly by turning
pump shaft.
INSTALLATION
● Assemble o-ring and dowel pin.
● Assemble oil pump to RH. Crank case.
OIL RINGS OIL RINGS OIL RINGS OIL RINGS OIL RINGS OIL RINGS OIL RINGS
OIL RINGS OIL RINGS OIL RINGS OIL RINGS OIL RINGS OIL RINGS
OIL RINGS OIL RINGS OIL RINGS OIL RINGS
OIL RINGS OIL RINGS OIL RINGS OIL RINGS OIL RINGS
● Assemble the following parts
- Oil pump drive gear
- RH. Crank case cover
- A.C. Generator
- Cooling fan and cooling fan cover
- Muffler