Oki c911 Disassembly & Reassembly Procedures page 4

Remove all toner cartridges by lifting the
3
front edge and slowly pulling it out.
You will see a blue handle on top of the
toner of the toner cartridge when it is
about half way out. Lift and support the
toner cartridge by this handle.
Open the front door to reveal the installed
4
drums.
Remove the drums by lifting the front edge
and pulling the drum out. As you slowly
pull the drum out, grab the drum as shown
to fully remove and support the drum as
you remove it.
CAUTION:
Never grab the drum
assembly around the bottom as your
hands / fingers may touch the surface of
the drum, leaving oil on the drum surface.
NOTE:
Never wipe the drum surface
with anything!
2