Oki c911 Disassembly & Reassembly Procedures page 28

Remove 4 black screws under the hopping
67
unit.
Unplug 7 wire (purple) connector from
68
main board (TRAY SNS).
Unplug 2 wire (red) connector from main
board (HOP CL).
Unplug 2 wire (red) connector from main
board (REG ICL).
Unplug 4 wire (red) connector from main
board (HOP M).
Unthread these harnesses from the wire guide & frame.
69
Slide the hopping unit out as you guide the
70
wire harness out.
On the back of the unit, remove 3 silver
71
screws securing the metal sub-assembly
shield.
26