Removal - Mitsubishi S4Q User Manual

STARTER
Disconnect connector
+
Battery
12V
24V (option)
Figure 184 Holding test
Disconnect connector
+
—
Battery
12V
24V (option)
Figure 185 Return test
Wires
Figure 186 Removal of starter
116 / 174
S
M
—
M
Nut
3) Holding test
With the battery connected to terminals S and
the body of the magnetic switch, pull out the
pinion fully with fingers. The pinion should not
return to the original position when it is
released.
CAUTION
Do not supply electricity for more than 10 continuous
seconds.
4) Return test
With the battery connected to terminals M and
the body of the magnetic switch, pull out the
pinion fully with fingers. The pinion should
return immediately to the original position
when it is released.
CAUTION
Do not supply electricity for more than 10 continuous
seconds.

27.2 Removal

1. Disconnect the cables from the battery terminals.
Be sure to disconnect the negative (-) cable first.
2. Disconnect the wires from the starter.
3. Remove the two starter mounting nuts, and
dismount the starter.
ENGLISH Service Manual Mitsubishi SQ-Series diesel engines
ELECTRICAL SYSTEM
Version 08/2004