Stihl MS 362 C-Q Instruction Manual page 27

N Press the button, the
decompression valve will be
opened
The decompression valve is closed
automatically when the engine starts for
the first time. For this reason, press the
button again before each additional
starting procedure.
0
1
4
N Push the hand guard (1) forwards –
the saw chain is blocked
N Simultaneously press the throttle
trigger interlock (2) and throttle
trigger (3) – set master control
lever (4)
MS 362 C-Q
Position choke shutter closed l
– if engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position starting acceleration n
– if engine is warm (once the engine
has been running for approx. one
minute)
N Hold and start the chain saw
When the engine has turned over for
the first time
N Move the Master Control lever (1) to
the position starting acceleration n
N Press the button on the
decompression valve
N Hold and start the chain saw
2
3
Once the engine is running
N
STOP
0
1
N
The chain brake is released – the chain
saw is ready for use.
1
2
Press the throttle trigger interlock
and blip the throttle trigger (2); the
Master Control lever (1) jumps to
the operating position F and the
engine begins to idle
Pull the hand guard toward the
handlebar
Open the throttle only when the
chain brake is off. Increased
engine speeds with the chain
brake on (saw chain is stationary)
will quickly damage the clutch and
chain brake.
English
STOP
0
25