Selecting The Display Notation And Decimal Places; Determination Of The Angular Unit - Sharp EL-501E Operation Manual

Statistics mode: @Æ
Used to perform statistical calculations. To clear this mode,
press @Æ.
When executing mode selection, statistical data will be
cleared even when reselecting the same mode.
• By pressing F or Automatic power off function, the
mode is cleared and returned to the normal mode.
Selecting the Display Notation and Decimal
Places
• When calculation result is displayed in the floating point
system, pressing ∞ displays the result in the scien-
tific notation system.
Pressing ∞ once more displays the result again in
the floating point system.
• Pressing @i and any value between 0 and 9
specifies the number of decimal places in the calcula-
tion result.
To clear the setting of decimal places, press @
i ..
100000÷3=
[Floating point]
[TAB set to 2]
→[Scientific notation]
→[Floating point]
• If the value for floating point system does not fit in the
following range, the calculator will display the result
using scientific notation system:
0.000000001 ≤ | x | ≤ 9999999999

Determination of the Angular Unit

In this calculator, the following three angular units (de-
grees, radians, and grades) can be specified.
ª100000/3=
@i 2
∞
∞@i.
Press G
– E-7 –
33333.33333
33333.33
3.33 04
33333.33333