Binary, Octal, Decimal, And Hexadecimal Operations (N-Base - Sharp EL-501E Operation Manual

BINARY, OCTAL, DECIMAL, AND
HEXADECIMAL OPERATIONS (N-BASE)
This calculator can perform the four basic arithmetic op-
erations, calculations with parentheses and memory cal-
culations using binary, octal, decimal, and hexadecimal
numbers.
When performing calculations in each system, first set the
calculator in the desired mode before entering numbers.
It can also perform conversions between numbers ex-
pressed in binary, octal, decimal and hexadecimal sys-
tems.
Conversion to each system is performed by the following
keys:
Ï ê : Converts to the binary system. "BIN" ap-
Ï î : Converts to the octal system. "OCT" ap-
Ï ì : Converts to the hexadecimal system. "HEX"
Ï í : Converts to the decimal system. "BIN",
Conversion is performed on the displayed value when
these keys are pressed.
Note: In this calculator, the hexadecimal numbers A – F
are entered by pressing
E
I, and
A → å, B → ∫, C → ç, D → ∂, E → é, F → ƒ
In the binary, octal, and hexadecimal systems, fractional
parts cannot be entered. When a decimal number having
a fractional part is converted into a binary, octal, or hexa-
decimal number, the fractional part will be truncated. Like-
wise, when the result of a binary, octal, or hexadecimal
calculation includes a fractional part, the fractional part will
be truncated. In the binary, octal, and hexadecimal sys-
tems, negative numbers are displayed as a complement.
pears.
pears.
appears.
"OCT", and "HEX" disappear from the dis-
play.
F
l, and displayed as follows:
– E-13 –
A B
E, ™,
C D
⁄, ´,