Reset Switch/Display Pattern; Display Format And Decimal Setting Function - Sharp EL-W535TG Operation Manual

2. RESET SWITCH
If the calculator fails to operate
normally, press the reset switch on
the back to reinitialize the unit. The
display format and calculation mode
will return to their initial settings.
NOTE:
Pressing the reset switch
will erase any data stored
in memory.
Reset switch
4. DISPLAY FORMAT AND
DECIMAL SETTING FUNCTION
For convenient and easy operation, this model can be used in one of five display modes.
The selected display status is shown in the upper part of the display (Display format indicator).
Note: If more 0's (zeros) than needed are displayed when the ON/C key is pressed, check
whether or not the calculator is set to a Special Display Format.
• Floating decimal point format 1/2 (N1/N2 is displayed) *1
Valid values beyond the maximum range are displayed in the form of [10-digit
(mantissa) + 2-digit (exponent)]
• Fixed decimal point format (FIX is displayed)
Displays the fractional part of the calculation result according to the specified
number of decimal places.
• Scientific notation (SCI is displayed)
Frequently used in science to handle extremely small or large numbers.
• Engineering scientific notation (ENG is displayed)
Convenient for converting between different units.
*1 The calculator has two settings for displaying a floating point number:
NORM1 (default setting) and NORM2. In each display setting, a number is
automatically displayed in scientific notation outside a preset range:
• NORM1: 0.000000001 < _ x < _ 9999999999
• NORM2: 0.01 < _ x < _ 9999999999
Let's compare the display result of
<Example>
[10000
10000
RESET
8.1 =] in each display format.
8.1
(Mixed fractions)
3. DISPLAY PATTERN
Alphabet
symbol
Hyperbolic
(ALPHA)
symbol (HYP)
Display format
2ndF symbol
indicator
(FIX, SCI, ENG,
Appears
N1, N2)
when the
entire
equation
cannot be
displayed.
Memory
symbol
NOTE:
The actual display does not appear like this.
This illustration is for explanatory purposes only.
5
Angular unit
indicator
(DEG/RAD/GRAD)
WriteView mode
(View as it is written)
Appears when the
entire equation
cannot be displayed.
Equation display
Answer display
Display format indicator
(NORM1 mode)