Installing The Water Dispenser Line; Connecting To The Water Supply Line - Samsung RF28HM Series User Manual

Hide thumbs Also See for RF28HM Series:
Table of Contents

Advertisement

1
When you turn the hex wrench counter-
clockwise (
4. After adjusting the doors, please insert the
supplied fastener ( 6 ) using a pliers ( 5 ) in
the gap between the hinge-grommet ( 7 ) and
the lower hinge ( 8 ). The number of fasteners
you'll need to insert depends on the gap.
2 fastener are enclosed with the
refrigerator.
The thickness of each fastener is 0.04".
WARNING
• Children should be supervised to ensure that
they do not play with the fastener.
- There is a risk of death from suffocation if a
child swallows the fastener.
Pay special attention to children because it can
be dangerous.
Keep the fastener out of reach of children.
INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a fi lter is one of the helpful
features on your new refrigerator. To help promote
better health, the water fi lter removes unwanted
particles from your water. However, it does not
sterilize the water or destroy microorganisms. You
may need to purchase a water purifying system to
do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
DA68-02952A-01.indb 15
DA68-02952A-01.indb 15
2
3
3
4
), the door will move up.
English - 15
pressure of 20-125 psi (138 ~ 862 kPa) is
required.
If the refrigerator is installed in an area with low
water pressure (below 20 psi), you can install
a booster pump to compensate for the low
pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly fi lled. To do this, press the water
dispenser lever until the water runs from the water
outlet.
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and a ¼" compression nut.

Connecting to the water supply line

1. First, shut off the main water supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
Cold water line
Cold water line
Pipe clamp
Pipe clamp
Shut off valve
Shut off valve
3. Connect the water line installation kit to the
shut off valve.
Cold water line
Cold water line
Pipe clamp
Pipe clamp
Shut off valve
Shut off valve
Water line installation kit
Water line installation kit
2013. 12. 3.
2013. 12. 3.
8:50
8:50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rf25hm series

Table of Contents