Option 2; Via Ios-Device - Airstream A100 User Manual

4. A prompt will appear on the screen of the iOS-device. This
is just asking if you want to allow the device to share the
security data with the A100. Press "Allow".
5. The blue LED will then start to flash blue again as per Pattern
2 and turn solid blue when connected to the WiFi network.
6. When the LED is solid blue, remove the USB lead from the
device and the A100. You are now able to start playing music
via AirPlay. Refer to page 11 for instruction on playing music
via AirPlay.
HINT
If you face problems connecting the A100 using this
method, try using the web portal via the PC/ Mac or the
iOS device.

Option 2.

Using this method of connection you need either a wireless enabled
PC/ Mac or an iPod Touch, iPhone or iPad running iOS5 or later.
This method of connectivity involves manually entering the
wireless network name (SSID) and security information (WEP Key)
into the A100's web portal from either the computer or iOS-device
via a temporary wireless network.
HINT
Make a note of the name of the wireless network
(SSID) that you are connecting to and also the security
information (WEP, WPA or WPA2) to ensure the seamless
connection of the A100 to the wireless network.

Via iOS-Device

1. Turn the A100 on from standby mode. The LED on the front
will flash blue, firstly in pattern 2 then pattern 1 sequence.
2. When it changes to Pattern 1, it is not connected to a wireless
network. Press and hold the Airstream Connect/ Airplay Direct
Button (Item 2 on Page 3) until the LED on the front flashes
white (Pattern 3). This will take approximately 12 seconds.
3. On the device, go to Settings, then WiFi.
7