Table of Contents
Advertisement
Getting Ready to Free Your Music
Connecting the Speakers
To connect the speakers/ cables, ensure that the cables are long
enough to rech the desired locations of the A100 and the position
of the speakers.
If using 4mm banana plugs simply insert them into the terminals
on the back of the A100.
If using bare wire, press the sprung terminal and insert the cable
paying particular attention to the markings on the cables and the
terminals.
Ensure that the positive cable goes to the positive terminals and
likewise with the negative.
Connecting the Power
IMPORTANT: Please follow the following instructions in sequence.
Connect the mains lead to the back of the A100, connect to wall
socket and were applicable turn on.
1. Connect mains input lead into A100
2. Insert mains plug into allsocket and where applicable turn on.
4
Advertisement
Table of Contents
