Charging Via The Usb; Firmware Update; AutomaticNotificationOfFirmwareUpdate - Airstream A100 User Manual

Charging via the USB

Before proceeding, please ensure the A100 is turned on from
standby mode.
1. Connect the apple supplied USB lead to the A100 and your device.
HINT
You can continue to use other sources while you are
charging your device. If you wish to play music from
the device currently charging, we would recommend
using the USB, digital input rather than AirPlay.

Firmware Update.

The A100 automatically searches for software updates whenever
it is turned on (providing there is a connection to the internet).
However, there are other ways of updating the firmware. These
are manually via the internet or via a USB memory stick. Details
of all methods are outlined below.

AutomaticNotificationofFirmwareUpdate

By default the A100 is set up to inform you a firmware update is
available automatically.
1. After the A100 has gone through the initial boot up procedure
and connected to the network (blue LED stops flashing), the
LED will flash white slowly (Pattern 1) indicating that an
update is available.
2. Press and hold the standby button until the LED on the front
is illuminated solid white.
3. Release the button and the LED will then go through various
states and colour changes, indicating different stages of the
update process:
White (Flashing very fast) - Updating the firmware.
Cyan (Illuminated for 2 seconds)
OFF - Update complete.
HINT
If the LED is slowly flashing red, the update has failed.
Follow the steps for the Manual Update by internet or
USB to ensure its success.
4. Once the update has been successfully completed, the A100
will go through the initial start up procedure as described on
page 4.
5. You may then need to reconnect the A100 to the WiFi network as
described on page 6.
14