Factory Reset; Changing The Remote Battery - Airstream A100 User Manual

Factory Reset

Should the situation arise where you need to carry out a factory
reset because of problems or difficulties with the A100, follow the
steps below.
1. With the A100 powered up and out of standby mode, press and
hold the Sharing Button for approximately 12 seconds (Item
3 on page 3).
2. The LED on the front will turn red and the A100 will go into
standby mode. When this happens, the settings have been
reset.

Changing the Remote Battery

1. Holding the remote in your hands with the standby button
pointing away from you, push back on the black half of the
remote.
2. Separate the two halves and the battery will be present in the
black half of the remote.
3. Slide the battery out and replace only with the same type,
CR2025 3v.
18