Via Laptop/ Pc - Airstream A100 User Manual

Via Laptop/ PC

HINT
The Laptop or PC, must be wireless enabled with
wireless turned on.
1. Turn the A100 on from standby mode. The LED on the front
will flash blue, firstly in pattern 2 then pattern 1.
2. When it changes to Pattern 1, it is not connected to a wireless
network. Press and hold the AirstreamConnect/ AirPlay Direct
Button (Item 2 on Page 3) for approximately 12 seconds until
the LED on the front flashes white (Pattern 3).
3. On the Laptop/ PC, go to the Wireless network selection tool.
HINT
On a Windows 7 Machine, click on the WiFi strength
indicator in the bottom right hand corner. If it is
hidden, click on the little up arrow.
4. In the list will be your network (probably with "Connected"
next to it), and any other wireless networks within range. One
of them will be Airstream A100.
HINT
If Airstream A100 isn't displayed, click the refresh
arrows (top right corner of the window).
5. Click on Airstream A100, and then the Connect button. After
a few seconds, you will be connected to the Airstream A100
wireless network.
Continue to Step 7.
6. On a Mac, click on the wireless network signal strength
indicator located in the bar at the top of the desktop and
select Airstream Connect. Continue to Step 7 below.
HINT
With both Windows and Mac OS's, if AirstreamConnect
isn't displayed, come out of the selection window and
then try again after a few seconds.
9