Airstream A100 User Manual page 18

3. Click on the drop down menu next to 'Update Method' and
select the only option available which is "Firmware Update
From Network".
4. Click on Ok. The page will change with a note to say it should
refresh in a couple of seconds, or click a link. Click the link
(if it doesn't refresh).
The LED on the A100 will turn white.
5. Next, click on "Choose File" and navigate to the location the
updated firmware file was saved to. Select it and click open.
6. Click on "Upload".
7. Check the details of the file on the web page and click "OK".
8. The web page will now change showing the progress of the
update. At the same time, the LED will go through various states
and colour changes indicating different stages of the update
process:
White (Flashing very fast) - Updating the firmware.
Cyan (Illuminated for 2 seconds)
OFF - Update complete.
The A100 will now go into standby mode.
HINT
If the update sequence differs from above, the update
may have failed. Please retry using the USB update
or web portal update. Also check the support section
of www.airstream-ma.com
9. The update is now complete. The web page might not say that
it is 100% complete, but when the A100 goes into standby
mode (standby button illuminated red), it has completed the
update process. Close the web browser.
10. Press the standby button and the A100 will go through the
initial start up procedure described on page 4.
16