Airstream A100 User Manual page 12

7. On the computer, open your web browser and in the address
bar at the top of the page, type in the following address to
load the Airstream web portal: 192.168.1.12
8. Click on WiFi Setup on the left hand side of the page. In this
page, you will see the details of the A100 and the "Profile" of
the wireless network you are about to connect to.
9. Click the drop down arrow to select the "Service Set ID"
(SSID). In the list should be your wireless network. Select
your network and enter the security key.
10. Click Apply. When you do, a warning pop up will be displayed,
click OK.
Windows pop up:
Mac pop up:
11. After clicking the OK button on the pop up, there will be no
other visible indication on your browser that the A100 is
connected to the network.
The LED on the A100 will flash blue while it is establishing a
connection to the wireless network and then change to the
previous input mode once it has been connected. This will be
indicated by the LED.
To select AirPlay, press the input toggle button until the LED
is blue.
12. Remember to return to the Available Wireless Networks list
on your computer and reselect your home Wireless Network.
13. To start streaming to the A100 from your PC, Mac or iOS device,
please refer to page 11
HINTS
If the LED flashes red slowly (pattern 1), then it has
failed to connect. You will have to repeat the above
steps to try again.
If it still flashes red slowly after repeating the above
steps, try moving the A100 closer to the router.
10