Picture - Excel Navigator 4 User Manual

User manual
Freewheel
The Navigator is equipped with a so-called freewheel function. This allows the Navigator to be moved
without using the engine. Push the backrest to move the scooter. In this freewheel position the
scootercan not be driven electrically. You can engage the freewheel function by the freewheel lever on
the rear side of the scooter, just below the cover (picture 36).

Picture 36

It is important to first fully turn off the power before engaging the freewheel lever. The power needed
to push the scooter is mimimal. The brakes of the Navigator are not in use during freewheel
engagement. This can be reversed by turning the freewheel function off.
Fault by engaged freewheel
If the Navigator is powered when you engage the freewheel lever, the status indicator will indicate fault
code 5. To erase the fault code and drive electrically please proceed as follows:
first disengage the freewheel function (push te freewheel lever down)
•
then, power off the system (this erases the fault)
•
when the system is powered up the scooter is able to drive again
•
Excel Navigator
Page 14