Table of Contents
Advertisement
Chapter 4. Removing and Replacing G8052 Components
Removing Port Transceivers
This chapter describes how to remove G8052 hardware components for
replacement. The following topics are covered:
•
"Removing Port Transceivers" on page 53
•
Removing and replacing hot-swap modules-
-
"Removing and Replacing a Power Supply Module" on page 54
-
"Removing and Replacing a Fan Module" on page 58
•
Removing the switch from one of the supported rack types-
-
-
-
"Removing the G8052 from a Lenovo iDataPlex Rack" on page 64
•
"Removing the 1U Air Duct Option" on page 66
•
"Replacing the G8052" on page 67
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
•
Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
•
Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Class 1 Laser Product
Laser Klasse 1
Luokan 1 Laserlaite
Appareil À Laser de Classe 1
53
Hide quick links:
Advertisement
Table of Contents
