Installing The G8052 In A Lenovo Idataplex Rack - Lenovo RackSwitch G8052 Installation Manual

Installing the G8052 in a Lenovo iDataPlex Rack

© Copyright 2015 Lenovo
This section describes how to install the G8052 in a Lenovo iDataPlex rack. The
iDataPlex mounting kit allows the switch to be mounted either horizontally or
vertically.
The kit must be purchased separately. It includes the following parts:
Table 12. Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number Description
RID label
1
M6 locking washers
2
M6 screws
3
M6 clip nuts
4
M4 screws
5
Switch front brackets
6
Switch rear brackets
7
Rear mounting brackets
8
Attention: The rack-mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2-post application). If
the switch has an undesirable amount of sag, it is recommended to use a 4-post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4-post rack.
Statement 26
CAUTION:
Do not place any object on top of rack-mounted devices.
Quantity
Chapter 3: Installing G8052 Hardware and Options
1
8
8
8
16
2
2
2
41