Table of Contents
Advertisement
6.6.9
Reviewing the punched material
1 To replay the punch-in, press the
Playback start (the
REC FUNCTION
of the armed tracks will continue to flash).
2 At the post-roll point, the tape automatically
rewinds to the pre-roll point.
3 If you want to record the punch-in again, press
the
key
AUTO PUNCH
flashes, and repeat the process described
above.
4 If you are satisfied with the punch-in, follow
the steps below, otherwise, press
return to the punch-in point, press the
key so that the indicator flashes, and
PUNCH
repeat the take.
6.6.10 Exiting punch-in mode
1 Disarm any armed tracks (press the
keys so that the indicators go out).
FUNCTION
2 Press the
key
CLEAR
PUNCH
(or rehearsal) mode.
The punch points are still retained in memory.
3 You can press the
AUTO MON
indicator goes out and normal monitoring
modes are now in effect (5, "Monitoring
modes"). However, leaving the unit in AUTO
MONITOR mode may be more useful while
recording.
6 – Basic Operations–Punch-in and punch-out
key.
PLAY
indicators
M
so that the indicator
to
LOC 1
AUTO
REC
G
to exit the
AUTO
key so that the
39
TASCAM DA-98HR
Advertisement
Table of Contents
