Panasonic DP-C405 Service Handbook page 431

4.1.9. F9 Mode: Unit Maintenance
Set the machine to Service Mode, and press the "9" key on the Control Panel.
↓
Press the "Start" key to enter the F9 Service Mode on the Control Panel.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another function, select the Tab key on the Touch Panel display, or scroll the menu
with the " ", " " buttons.
↓
Select the desired function on the Touch Panel display, and then select the "OK" button.
↓
Select the "Close" button twice on the Touch Panel display.
↓
Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the Service
Mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s). (Turn the Power Switch on
the Left Side of the machine to the OFF then back to the ON position.)
Service
Mode
F9 Unit
Maintenance
Ver. 1.1
Item
00 Fax Service Mode
01 Service Alert Tel #
02 Firmware 00 SC
Version
01 SC Boot
02 PNL
03 EC
04 SCN
05 Finisher
06 FCB
07
-11
12 Data Security Kit
F9 Mode
Not Used
(DP-C405/C354
Series Only)
431
DP-C405/C305/C265
Remarks
Displays the contact number when a
machine malfunction occurs.
Displays the firmware version for SC.
Displays the firmware version for SC
Boot.
Displays the firmware version for PNL.
Displays the firmware version for EC.
Displays the firmware version for SCN.
Displays the firmware version for
Finisher.
Displays the firmware version for FCB.
Displays the firmware version for Data
Security Kit.
FEB 2008