Panasonic DP-C405 Service Handbook page 397

4.1.6. F6 Mode: Adjust Parameters (For Copier)
Set the machine to Service Mode, and press the "6" key on the Control Panel.
↓
Press the "Start" key to enter the F6 Service Mode on the Control Panel.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another function, select the Tab key on the Touch Panel display, or scroll the menu
with the " ", " " buttons.
↓
Select the "Input" button code number on the Touch Panel display, and then select the "OK" button.
If you wish to input minus value, press the "Reset" key on the Control Panel.
When the "Cancel" button is selected, the selected code input will not be accepted.
↓
Select the "Close" button on the Touch Panel display.
↓
Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the Service
Mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s). (Turn the Power Switch on
the Left Side of the machine to the OFF then back to the ON position.)
Note:
The Factory Setting is different in each model.
No. Item
000 Registration Clr Normal
001 Registration Clr Slow
002- Not Used
004
005 Registration B/W Normal
006 Registration B/W Slow
Ver. 1.1
F6 Mode
Remarks
Color original registration adjustment for normal
print speed.
Color original registration adjustment for half of
normal print speed.
Monochrome original registration adjustment for
normal print speed.
Monochrome original registration adjustment for
half of normal print speed.
397
DP-C405/C305/C265
Setting Range
-50 ~ +50
0.25 mm
(DP-C405/C305/
C265/C354/C264)
0.21 mm
(DP-C322/C262)
-50 ~ +50
0.21 mm
-50 ~ +50
0.34 mm
(DP-C405/C305/
C354/C323/C322)
0.27 mm
(DP-C265/C263/
C262)
0.25 mm
(DP-C264)
0.21 mm
(DP-C213)
-50 ~ +50
0.21 mm
FEB 2008