Panasonic DP-C405 Service Handbook page 310

3.3.18. Abnormal Printing
Is the recording paper loaded
in the Paper Tray properly?
Is the recording paper size, and
thickness within specification?
Is Panasonic Toner being used?
Are all switches, and sensors
operating properly?
Are there any foreign particles,
or paper pieces in the receiver
unit?
Do the rollers rotate properly?
Is the receiving mechanism
operating correctly?
Ver. 1.1
START
No
Yes
No
Yes
No
Yes
No
Yes
Yes
No
No
Yes
No
Yes
END
1. Adjust the Paper Width Guide.
2. Adjust the Paper Length Guide.
Replace with correct paper.
Replace with the Panasonic Toner.
Adjust, clean, or replace.
Remove the foreign particles, or paper pieces
from the receiver unit.
1. Check all rollers, gears, drive clutches, and
springs.
2. Adjust, or replace any defective parts.
Adjust, or replace any defective parts.
310
DP-C405/C305/C265
FEB 2008