Panasonic DP-C405 Service Handbook page 117

Ver. 1.1
(83) Pull the Handle out.
<Replacing the Upper Intermediate Roller>
(84) Remove the Snap Ring.
(85) Remove the Bearing.
(86) Remove the Upper Intermediate Roller by
sliding to the left first, and then pulling the right
side out.
(87) Remove the Gear.
(88) Replace the Upper Intermediate Roller.
Caution: DP-C405 Series
When reinstalling, make sure that the Bearing
(Not Ball Bearing) is installed properly as same
position (Front).
<Replacing the Lower Intermediate Roller>
(89) Remove the Snap Ring.
(90) Remove the Bearing.
(91) Remove the Lower Intermediate Roller by
sliding to the left first, and then pulling the right
side out.
(92) Remove the Gear.
(93) Replace the Lower Intermediate Roller.
Caution: DP-C405 Series
When reinstalling, make sure that the Bearing
(Not Ball Bearing) is installed properly as same
position (Front).
<Replacing the Exit/Feed Rollers>
(1) Open the Right Side Upper Cover.
117
DP-C405/C305/C265
FEB 2008