Panasonic DP-C405 Service Handbook page 342

Code Function
E7-51 Finisher
Delivery
Motor
E7-52 Finisher
Paddle Motor
E7-53 Finisher
Saddle
Folding
Sensor
E7-54 Finisher
Punch
Communicati
on Abnormal
E7-55 Finisher
Punch Power
Supply
E7-56 Finisher
Punch
Registration
Sensor
E7-57 Finisher
Punch
Sensor
(Horizontal
Registration)
E7-58 Finisher
Punch
Sensor
(Waste Full)
Ver. 1.1
E7: Optional Unit Error Codes
Contents
Finisher Delivery
Belt Home Position
Sensor does not
turn Off/On within a
predetermined time.
1. Paddle Home
Position Sensor
does not turn Off
within a
predetermined
time.
2. Paddle Home
Position Sensor
does not turn On
within a
predetermined
time.
Saddle Folding
Sensor does not
detect the proper
signal to correctly
adjust the Folding
position.
No response from
Punch unit within a
predetermined time.
Punch unit does not
detect +24 VDC.
Punch Registration
Sensor does not
detect the proper
signal to correctly
adjust the Punching
position.
Punch Folding
Sensor does not
detect the proper
signal to correctly
adjust the Folding
position.
Punch Sensor does
not detect the
proper signal to
adjust Punching
position.
Section
Finisher 1. Delivery Belt Home Position Sensor is
defective.
2. Check the wiring between the Finisher
Controller PCB, and the Delivery
Motor.
3. Stack Delivery Roller is abnormal.
4. Delivery Motor is defective.
5. PCB is defective. (Finisher Controller
PCB)
Finisher 1. Paddle Home Position Sensor is
defective.
2. Swing Guide Home Position Sensor is
defective.
3. Check the wiring between the Finisher
Controller PCB, and the Paddle Motor.
4. Paddle, Swing Guide Assembly is
abnormal. Try turning the Paddle Motor
clockwise and counter-clockwise by
hand. Is there a mechanical tapping in
the rotation of the Paddle, or the up/
down movement of the Swing Guide?
Correct the mechanical mechanism.
5. Finisher Controller PCB is defective.
Finisher 1. Saddle Folding Sensor is defective.
2. Finisher PCB is defective.
Finisher 1. Finisher PCB is defective.
2. Punch PCB is defective.
Finisher 1. Punch PCB is defective.
Finisher 1. Punch Registration Sensor is
defective.
2. Punch PCB is defective.
Finisher 1. Saddle Folding Sensor is defective.
2. Punch PCB is defective.
Finisher 1. Punch Sensor is defective.
2. Punch PCB is defective.
342
DP-C405/C305/C265
Check Points Unit
DA-
FS405/
FS356/
FS325
only
FEB 2008