Schematics; Cautions; Basic Block Names And Functions - FujiFilm FINEPIX S9100 Service Manual

FinePix S9100/S9600 Service Manual

3. Schematics

3-1.

Cautions

<Cautions when replacing parts>
• Do not reuse removed parts. Always use new parts.
• Note that the negative side of tantalum condensers is readily damaged by heat.
• Except for chemical condensers and tantalum condensers, voltage is not displayed on condensers with a voltage
resistance of 50V or less.
• Resistors not marked are 1/16W chip resistors.
• KΩ = 1000Ω, MΩ = 1000KΩ
• B characteristics of variable resistors and semi-fixed resistors are not displayed.
3-2.

Basic Block Names and Functions

Part name
LENS CONST CCD FPC BLOCK
MAIN PWB ASSY CAMERA BLOCK
MOTOR BLOCK
AUDIO BLOCK
LCD/EVF BLOCK
IPS2 BLOCK
STRB BLOCK
PROCESS BLOCK
MAIN IF BLOCK
DCST PWB ASSY DC/DC BLOCK
KEY PWB ASSY KEY BLOCK
TOP FPC ASSY TOP FPC BLOCK
Block name
CCD Output (IC800)
CCD Output A/D Conversion (IC103)
Shutter/iris/zoom Drive (IC350)
Audio IN/OUT(IC500)
LCD/EVF Control, Back Light Control
Power Control, LED Driver, Flash Charge Control (IC300)
Flash Charge
Image Signal Processing, USB Communications,
System Control (IC204)
Connection with the DCST PWB
Power Supply Generation (IC600), Power Control
Key SW
Power SW, Release SW, Key SW
3. Schematics
Function
3-1