Philips 150P4CG Service Manual page 25

http://www.jdwxzlw.com/?fromuser=华盛维修
Note:
During the loading, EDID30 will verify the EDID data which just
loaded from monitor before proceed any further function, once the
data structure of EDID can not be recognized, the following error
message will appear on the screen (Fig. 8). Please confirm
following steps to avoid this message.
1. The data structure of EDID was incorrect.
2. DDC IC that you are trying to load data is empty.
3. Wrong communication channel has set at configuration setup
Windows.
4. Cables loosed or poor contact of connection.
Fig. 8
Modify DDC data (Serial No.)
1. Click icon on the toosl bar.
2. Click till the Step 7 of 9 window appears.
3. Type the new Serial No. (for example, TY00 0245000001).
4. Click till the last step window appears, then click
exit the Step window.
TY00 0245000001
家电维修资料网，免费下载各种维修资料
DDC Instructions
Write DDC data to monitor
1. Click
2. Click
Save DDC data as a file
Sometimes, you maybe need to save DDC data as a text file for using
on other DDC chip. To save DDC data, follow the steps below:
1. Click
file format is ddc type which can be open by Microsoft WordPad.
2. Click
Load DDC data from file
1. Click
2. Select the file you want to open.
3. Click .
to
4. Now you can re-programming DDC data which you just loaded
from a file, please be confirmed that model and serial number are
correct and match with the monitor you are trying to re-write.
150P4 LCD
Go to cover page
icon from the tools bar to starting rewrite DDC data.
for confirmation.
icon on the tools bar and type a file name you like. The
button.
from the tools bar.
Button.
25